Measurement of Curtain Width
Recommend Fullness
If you already have a pole installed, measure its full length, and our recommended fullness ratio is 1.5-2 for creating waves and folds when it’s closed.
Recommended Curtain Width = Curtain Pole Length x Fullness Ratio
If you do not have a pole yet, follow the steps below to measure the pole length and calculate the recommended curtain width:
-
Measurement A
Measure the full width of your window; if it is in a recess, measure the full width of the recess.
-
Measurement B
For a recessed window, you’ll need to decide whether you’d like to have the curtains inside the recess or above. If you want your curtains above the window, you need to decide how far your curtains will over-hang the wall on each side of the window. This would normally be around 8 inches each side to make sure the curtains open widely.
-
Measurement C
Add up Measurements A+B+B from steps 1 and 2, this will give you the desired curtain pole length. Please do not include curtain pole finials for measurement C.
-
Recommended curtain width
Finally, multiply
C by 1.5-2, depending on the fullness you would like to have.
Recommended Curtain Width = 1.5 to 2 x Measurement C
②
Measurement of Curtain Length
ⒶSill Length
Measure the distance between the top of the pole to the bottom of the window and then add 1.2" to achieve sill length.
ⒷBelow Sill
Measure the distance between the top of the pole to the bottom of the window and then add 7.2” to achieve below sill length (about 6” below your window sill).
ⒸFloor Length
Measure the distance between the top of the pole to the floor and then add 0.2" to achieve floor length (about 1” above the floor).
Example
Measurement of Curtain Width
Recommend Fullness
If you already have a pole installed, measure its full length, and our recommended fullness ratio is 1.25-2 for creating waves and folds when it’s closed.
Recommended Curtain Width = Curtain Pole Length x Fullness Ratio
If you do not have a pole yet, follow the steps below to measure the pole length and calculate the recommended curtain width:
1. Measurement A
Measure the full width of your window; if it is in a recess, measure the full width of the recess.
2. Measurement B
For a recessed window, you’ll need to decide whether you’d like to have the curtains inside the recess or above. If you want your curtains above the window, you need to decide how far your curtains will over-hang the wall on each side of the window. This would normally be around 8 inches each side to make sure the curtains open widely.
3. Measurement C
Add up Measurements A+B+B from steps 1 and 2, this will give you the desired curtain pole length. Please do not include curtain pole finials for measurement C.
4. Recommended curtain width
Finally, multiply
C by 1.25-2, depending on the fullness you would like to have.
Recommended Curtain Width = 1.25 to 2 x Measurement C
②
Measurement of Curtain Length
ⒶSill Length
Measure the distance between the top of the pole to the bottom of the window and then add 1.2" to achieve sill length.
ⒷBelow Sill
Measure the distance between the top of the pole to the bottom of the window and then add 7.2” to achieve below sill length (about 6” below your window sill).
ⒸFloor Length
Measure the distance between the top of the pole to the floor and then add 0.2" to achieve floor length (about 1” above the floor).
Example
Measurement of Curtain Width
Recommend Fullness
If you already have a pole installed, measure its full length, and our recommended fullness ratio is 1.5-2 for creating waves and folds when it’s closed.
Recommended Curtain Width = Curtain Pole Length x Fullness Ratio
If you do not have a pole yet, follow the steps below to measure the pole length and calculate the recommended curtain width:
1. Measurement A
Measure the full width of your window; if it is in a recess, measure the full width of the recess.
2. Measurement B
For a recessed window, you’ll need to decide whether you’d like to have the curtains inside the recess or above. If you want your curtains above the window, you need to decide how far your curtains will over-hang the wall on each side of the window. This would normally be around 8 inches each side to make sure the curtains open widely.
3. Measurement C
Add up Measurements A+B+B from steps 1 and 2, this will give you the desired curtain pole length. Please do not include curtain pole finials for measurement C.
4. Recommended curtain width
Finally, multiply
C by 1.5-2, depending on the fullness you would like to have.
Recommended Curtain Width = 1.5 to 2 x Measurement C
②
Measurement of Curtain Length
ⒶSill Length
Measure the distance between the top of the pole to the bottom of the window and then add 1.2" to achieve sill length.
ⒷBelow Sill
Measure the distance between the top of the pole to the bottom of the window and then add 7.2” to achieve below sill length (about 6” below your window sill).
ⒸFloor Length
Measure the distance between the top of the pole to the floor and then add 0.2" to achieve floor length (about 1” above the floor).
Example
Measurement of Curtain Width
Recommend Fullness
If you already have a pole installed, measure its full length, and our recommended fullness ratio is 1-2 for creating waves and folds when it’s closed.
Recommended Curtain Width = Curtain Pole Length x Fullness Ratio
If you do not have a pole yet, follow the steps below to measure the pole length and calculate the recommended curtain width:
1. Measurement A
Measure the full width of your window; if it is in a recess, measure the full width of the recess.
2. Measurement B
For a recessed window, you’ll need to decide whether you’d like to have the curtains inside the recess or above. If you want your curtains above the window, you need to decide how far your curtains will over-hang the wall on each side of the window. This would normally be around 8 inches each side to make sure the curtains open widely.
3. Measurement C
Add up Measurements A+B+B from steps 1 and 2, this will give you the desired curtain pole length. Please do not include curtain pole finials for measurement C.
4. Recommended curtain width
Finally, multiply
C by 1-2, depending on the fullness you would like to have.
Recommended Curtain Width = 1 to 2 x Measurement C
②
Measurement of Curtain Length
ⒶSill Length
Measure the distance between the top of the pole to the bottom of the window and then add 1.2" to achieve sill length.
ⒷBelow Sill
Measure the distance between the top of the pole to the bottom of the window and then add 7.2” to achieve below sill length (about 6” below your window sill).
ⒸFloor Length
Measure the distance between the top of the pole to the floor and then add 0.2" to achieve floor length (about 1” above the floor).
Example
Measurement of Curtain Width
Recommend Fullness
If you already have a pole installed, measure its full length, and our recommended fullness ratio is 1-2 for creating waves and folds when it’s closed.
Recommended Curtain Width = Curtain Pole Length x Fullness Ratio
If you do not have a pole yet, follow the steps below to measure the pole length and calculate the recommended curtain width:
1. Measurement A
Measure the full width of your window; if it is in a recess, measure the full width of the recess.
2. Measurement B
For a recessed window, you’ll need to decide whether you’d like to have the curtains inside the recess or above. If you want your curtains above the window, you need to decide how far your curtains will over-hang the wall on each side of the window. This would normally be around 8 inches each side to make sure the curtains open widely.
3. Measurement C
Add up Measurements A+B+B from steps 1 and 2, this will give you the desired curtain pole length. Please do not include curtain pole finials for measurement C.
4. Recommended curtain width
Finally, multiply
C by 1-2, depending on the fullness you would like to have.
Recommended Curtain Width = 1 to 2 x Measurement C
②
Measurement of Curtain Length
ⒶSill Length
Measure the distance between the top of the pole to the bottom of the window and then add 1.2" to achieve sill length.
ⒷBelow Sill
Measure the distance between the top of the pole to the bottom of the window and then add 7.2” to achieve below sill length (about 6” below your window sill).
ⒸFloor Length
Measure the distance between the top of the pole to the floor and then add 0.2" to achieve floor length (about 1” above the floor).
Example
Measurement of Curtain Width
Recommend Fullness
If you already have a pole installed, measure its full length, and our recommended fullness ratio is 1-1.5.
Recommended Curtain Width = Curtain Pole Length x Fullness Ratio
If you do not have a pole yet, follow the steps below to measure the pole length and calculate the recommended curtain width:
1. Measurement A
Measure the full width of your window; if it is in a recess, measure the full width of the recess.
2. Measurement B
For a recessed window, you’ll need to decide whether you’d like to have the curtains inside the recess or above. If you want your curtains above the window, you need to decide how far your curtains will over-hang the wall on each side of the window. This would normally be around 8 inches each side to make sure the curtains open widely.
3. Measurement C
Add up Measurements A+B+B from steps 1 and 2. This will give you the desired curtain pole length. Please do not include curtain pole finials for measurement
C.
4. Recommended curtain width
Multiply
C by 1-1.5, depending on how much of fullness you would like you would like to have.
Recommended Curtain Width = 1 to 1.5 x Measurement C
②
Measurement of Curtain Length
ⒶSill Length
Measure the distance between the top of the pole to the bottom of the window and then add 1.2" to achieve sill length.
ⒷBelow Sill
Measure the distance between the top of the pole to the bottom of the window and then add 7.2” to achieve below sill length (about 6” below your window sill).
ⒸFloor Length
Measure the distance between the top of the pole to the floor and then add 0.2" to achieve floor length (about 1” above the floor).
Example
Payment Security Guaranteed
Get Your Sample
Measure and Install Instruction
Estimated Arrival Date: 10/11/2022~10/18/2022
Multiple choices: Customize size (Available from 20" to 200" in height and width respectively) 、multiple color and curtain header type.
Material: 100% imported high-quality polyester.
Header type: GrommetRod PocketDual Rod PocketsBack TabTab Top4-IN-1
Package Included: 1 piece of curtain
Hand wash, max 86°F
Do not bleach, do not tumble dry
Warm ironing the back only
Do not dry cleaning
Do not use fabric softener to protect the fabric
